Oculus Quest Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple display stand for my Oculus Quest. To make it a bit easier to print, the base can be attached by…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 112
- Wydruki
- 0
- Wyświetlenia
- 1765
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution
This is a simple display stand for my Oculus Quest.
To make it a bit easier to print, the base can be attached by screws or printed in place.
It can be made with and without the wide base. I prefer it with the base. There are 6x1 threaded screw holes in the legs to attach the base if you do not want to print the single piece one. (I recommend running a 6x1 tap into the legs before attempting to use a screw.)
If you do want to use it without the base, be sure to use the one with the support ring so the legs don't break too easily.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Supports:
Doesn't Matter
Resolution:
0.3 works, for 0.25 better
Infill:
10% with 3 shells is plenty strong
Category: Video Games