1 / 3
Media Travel Case R21 Spring Latch — Fit Prototype — zdjęcie 1
1 / 3

Media Travel Case R21 Spring Latch — Fit Prototype

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An M3 pivot-and-catch spring clip for the R21 media travel case. Includes a single clip, a pair, and editable STEP.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
6
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This spring clip pivots on the upper M3 screw and catches on the lower screw. Lift the downward-facing lip to release it. R21 uses a 4.8 mm spring section and a 4.45 mm inside bend radius.

Download one clip or the side-flat PLA pair, plus the editable single-clip STEP in the archive. These files fit the R21 media travel case geometry with a nominal 17.565 mm screw-axis spacing. Measure your assembly and hardware before printing. Check the build orientation in your slicer and trial-fit the clip with the case empty.

Orion checked the CAD motion and the exported pair for overhangs. The pictures are CAD renders. Physical fit, retention, fatigue life, and loaded transport remain unverified.

Licence CC BY-NC-SA 4.0. Credit Isaiah Dupree when sharing or remixing.

Tagi