1 / 1
Parametric Box Tube Clamp w/ Screw Mount Point — zdjęcie 1

Parametric Box Tube Clamp w/ Screw Mount Point

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clamp designed for mounting a Keepteen D5 Solar Node using the included self-taping mount to 3in Box Tubing.

Ocena
0 / 5
Polubienia
2
Pobrania
0
Wydruki
0
Wyświetlenia
12
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This model is customizable in OpenSCAD, but requires the BOSL2 Library. The BOSL2 Library, Installation Instructions, and Documentation can be obtained here: https://github.com/BelfrySCAD/BOSL2

This Clamp was designed for mounting a Keepteen D5 Solar Node using the included roughly 5/16th self-taping mount to my Awning/Carport's 3in Box Tubing Supports using M8 Screws, but all that can be customized for other situations. The included STLs have one side of the clamp threaded in lieu of using nuts, but this too can be changed in the OpenSCAD Customizer.

For outdoor use, and durability, I recommend printing in PETG or ASA, with at least 15% infill (I used 20% Gyroid in PETG). Because I didn't take the time to add in additional bevels/fillets on the edges/in corners, you are likely to get some warping in those areas with those materials, but in my experience it never affected the functionality of the printed part. I may come back and update the model with those convenience features at a later date.

Tagi