Skate Bearing Spinners
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here are some spinners I put together for friends. The filenames are cryptic on purpose. Please do not use copyrighted…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 231
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
Here are some spinners I put together for friends.
The filenames are cryptic on purpose. Please do not use copyrighted names in comments.
They are sized for a snug fit on a 608 skate bearing on my printer. I also use superglue on both the bearing hole and the hub pin.
The ones with hex holes are designed for 3/8" nuts (1/2 wrench size) for added weight.
I have tested _hub_parts, gear_spinner, ww3, sm3, bw, bwhex. I will update with images as I test them.
- Had to reduce the size of the bw one, it was HUGE....
Print Settings
Printer:
Micromake D1
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.25mm
Infill:
50% or more
Notes:
I list high-infill to make them heavier.
I recommend you print the hubs at 100% or they are too easy to break.Category: Toys & Games