1 / 5
Geared Rope Maker
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my first attempt at a geared rope maker. Notes: The screws are pretty weak, so you may be better off with…
- Ocena
- 4,333 / 5
- Polubienia
- 38
- Pobrania
- 209
- Wydruki
- 4
- Wyświetlenia
- 1823
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 4) (Komentarze: 5)Remiksy (0)Kolekcje (59)Powiązane
This is my first attempt at a geared rope maker.
Notes:
- The screws are pretty weak, so you may be better off with nylon ones.
- At 0.25 layer height, the screws should not need post-processing, but the threaded holes will.
- For best results you either need a M6x1 tap, or a metal M6x1 screw with a groove cut in it to clean up the inside threads.
Updates:
- Only the 3 screws that hold the frame together are needed, v2 has the extra holes and threads removed.
- I redid the hooks to hopefully make them print better
- I make the screws go all the way through for added strength. (Even better would be to use nylon or metal M6x1x15 screws.)
- Added a new "hook gear" that you just tie the string/thread to. This version does not require supports.
- I finally shortened the non-threaded part of the screws. I have no idea why the old ones were so long.
Print Settings
Printer:
Micromake D1
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.25mm
Infill:
50% for strength
Notes:
Because of the hooks, the gears must be printed with supports.
Category: Hand Tools