Fujitsu Futro S740 - Case - Wall/Desk mount - Home Assistant
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for the Fujitsu Futro S740 with wall or under-desk mounting and a screw-on lid.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 2
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple case for the Fujitsu Futro S740.
The case can be mounted either on a wall or underneath a desk using the provided mounting holes.
The base features four M3 thread inserts. The lid is secured with M3x12 mm hex socket screws. Since the screw holes go all the way through, different screw lengths can be used if needed.
The design includes ventilation openings on the sides and front, as well as a simple pattern on the lid.
I printed the base in black PETG with a layer height of 0.24 mm and 18% infill (Gyroid). It should probably also work with PLA and less infill, but I wanted to play it safe.
The lid was printed in marine blue PLA with a layer height of 0.20 mm and 8% infill (Gyroid).
Have fun with it!