Bear Drawer Organizer with Head Bowl
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Friendly bear organizer with three drawers and a head bowl. Support-free printing and easy glued assembly.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 1
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I made this friendly bear organizer for my daughter's room. Three removable drawers keep small treasures tidy, and the bowl in the top of its head provides extra storage. The finished bear is approximately 22 cm tall.
Designed to print without supports in three print groups: rear body, front body and drawers. Dry-fit the integrated locating pins, then glue the two body sections together using plastic adhesive suitable for your filament; the drawers stay removable. Use the matching latest v2 parts. Print in PLA at 100% scale, with a 0.4 mm nozzle and 0.2 mm layers.
