1 / 4
One-Handed Paper Towel Holder – Cabinet Side Mount — zdjęcie 1
1 / 4

One-Handed Paper Towel Holder – Cabinet Side Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Paper towel holder for the side of a kitchen cabinet. Its conical screw cap clamps the roll for one-handed tearing.

Ocena
0 / 5
Polubienia
2
Pobrania
4
Wydruki
0
Wyświetlenia
13
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A simple, sturdy paper towel holder that mounts to the side of a kitchen cabinet with four screws.

One-handed use – the conical end cap makes the roll clamp itself in place, so it doesn't spin freely. Pull and tear off a sheet with just one hand.

Easy roll swap – unscrew the knurled end cap, slide a new roll onto the tube and screw the cap back in.

Dimensions

  • Mounting plate: 60 × 60 × 5 mm, 4 holes Ø4.5 mm (40 mm apart)

  • Tube: Ø38 mm, 230 mm long

  • End cap: conical knurled head (max. Ø42 mm), threads into the end of the tube

What you need

  • The 2 printed parts (holder + end cap)

  • 4 × stainless steel pan head screws, Ø4 mm (e.g. 4 × 16 mm for an 18 mm cabinet side panel)

Printing

  • Holder: print standing upright on the mounting plate. It is 235 mm tall, so you need at least 235 mm of build height.

  • End cap: print upside down, on its flat top.

  • No supports needed.

  • Suggested settings: PETG or PLA, 0.2 mm layer height, 3 walls, 20% infill.

The 3MF contains both parts on one plate, already in print orientation.

Assembly

  1. Screw the holder to the side of the cabinet with the 4 screws.

  2. Slide a kitchen roll onto the tube.

  3. Screw the end cap into the end of the tube.

Remixing

The STEP file (holder and end cap, assembled) is included, so you can easily adapt the design.

Tagi