1 / 2
Bikemaster (or similar) Wheel Balance/Truing Stand bearing pin holder — zdjęcie 1
1 / 2

Bikemaster (or similar) Wheel Balance/Truing Stand bearing pin holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bearing pin holder for a Bikemaster (or similar model with "C" shaped vertical supports) wheel balance/truing stand.

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
4
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

Bearing pin holder for a Bikemaster (or similar model with "C" shaped vertical supports) wheel balance/truing stand.  These piece fit into the interior space of the vertical supports, which must be unbolted from the base to install.  The piece holds the accessory bearing pins for wheel truing/alignment when not in use or when using the stand for wheel balancing.

Including the original Fusion file so you can edit as needed if your stand is slightly different or you want to make the piece taller/hole deeper.

Printed with standard Prusa PLA or PET settings.

Tagi