Givi Monokey top plate bumpers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Givi Monokey top plate bumpers/spacers for hard cases.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 2
- Wydruki
- 1
- Wyświetlenia
- 10
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Givi Monokey top plate bumper for hard cases. Used to replace or modify existing spacers on plastic or aluminum Givi top case mount plates. These are sized for a custom 6mm thick aluminum plate, but can me customized (Fusion file included) to adjust the height of the thin (push through) section of the piece. Necessary thickness will likely be less than 6mm if installing on a Givi branded top case plate. File includes bumpers of two heights, depending on the top case configuration you have. Most likely the thicker one will work best.
These may work for some Givi top case or side case mounts, but I have not tried those use cases.
Printed with Flex material, from 50-100% infill depending on the desired firmness of bumpers.