Ducati Scrambler 800 V-LEDS aux running light fork mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fork mounted V-LED aux running light holders and fork mounts, installed just below lower triple clamp.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 1
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Ducati Scrambler 800 V-Leds aux running light fork mount. These are designed around a specific led light module from V-Leds, but the light holders can be adjusted (Fusion files provided) to fit other small light pods. I would not recommend these for anything larger than 1" or 25mm diameter light pods, try at your own risk.
Hardware needed depends on application, in general the following is required: 6x screws, 12x washers, 6x nuts. Fastener holes are sized for around an M3-4 fastener.
Led light pods used for design are linked below (MAX Pod model), and will require additional wiring kit (or DIY) to hook up to switched power on your motorcycle. These lights are not meant to provide illumination of the road at night, but to make yourself and motorcycle more conspicuous to other road users.
https://www.vleds.com/shop-products/pod-lights.html
The fork mount brackets can easily be adapted (Fusion file) to fit other diameter forks, and the pod mounts will bolt right on. Each pod mount piece is designed to be left or right fitting and has a weep hole for water evacuation.
Printed with PET, ABS, CF or another resilient and UV resistant material, at least 50% infill.