Padel Racket Wall Mount with Strap Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A decorative wall mount for your padel racket: hang it by the throat and loop the wrist strap over the side hook.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Your padel racket deserves better than the bottom of the bag. This wall mount holds it by the throat and turns it into wall decor, with a small side hook that keeps the wrist strap tidy.
Why you'll love it
Looks good empty or loaded – perforated design in two styles: organic Voronoi cells or round holes like the ones on your racket.
No supports – the mount prints upside down and the hook prints flat on its side.
Single color, no AMS – one filament, one plate.
Strap hook – a separate glue-in hook on the right side for the wrist strap.
Quick and cheap – about 1 h 41 min and 38 g for mount + hook.
Fits most padel rackets – tested with a Bullpadel Vertex 03 and a Nox AT10 Genius.
Specs
Size | 134.5 × 46 × 50 mm |
Racket opening | 50 mm between cradles, 44 mm at the front, 38 mm deep |
Parts | 2 (mount + strap hook) |
Wall fixing | 2 countersunk holes for 4 mm screws, 30.6 mm apart |
Filament | approx. 38 g |
Print time | approx. 1 h 41 min 3 walls |
Assembly
Print one mount (pick your style) and one hook.
Push the hook through the slot in the right cradle, from the outside, until it sits flush with the inner face. The tip of the hook points up.
Add a drop of super glue (CA) and let it set.
Mark two holes 30.6 mm apart, drill, and fix the mount with wall plugs and two 4 mm countersunk screws.
Hang the racket by the throat and loop the strap over the hook.
Print ONE of the two mounts plus the hook. Or both!