1 / 4
Sprout - Sprout Pals Kawaii Planter (Seedling) | No Supports — zdjęcie 1
1 / 4

Sprout - Sprout Pals Kawaii Planter (Seedling) | No Supports

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Shy seedling in a kawaii pot. Printed plant or real air plant, no supports, any printer, FullColor 3MF for AMS.

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
3
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Meet SPROUT: a tiny, shy seedling with two round leaves. Part of Sprout Pals, a family of original kawaii planter toys (5 pals).

Two ways to use it:

  • Printed plant (no care): drop the soil cap into the pot and plug the seedling onto its peg.

  • - Real plant: leave the cap out. A nursery pot up to Ø48 mm sits on the floor; Ø49–53 mm hangs on the inner ledge. Air plants are perfect.

Designed to really print:

  • Every part prints flat with NO supports (overhangs ≤ 45°, checked in our overhang analysis).

  • - Parts: pot (plain + drain version), soil cap, seedling, saucer, 2 eye inserts. Press-fit Ø6 peg into a Ø6.4 hole.

  • - One colour per part works on ANY single-nozzle printer. Painted FullColor 3MF files are included for AMS / MMU.

Size: pot Ø65 × 58 mm. About 36 g and 3.3 h in total (PrusaSlicer estimate, PLA, 0.2 mm, 15 % infill).

Please note: Pictures are 3D renders. The model is checked digitally (watertight, sliced in PrusaSlicer) but has not been test-printed yet. Makes are very welcome! PLA is not watertight: for real plants use a nursery pot / liner or seal the inside. Decorative item, not a toy for children under 3 (small parts). Original design, made with AI-assisted tools.

Tagi