1 / 2
Tornado Magnetic Brake Ring Mod for Abu Garcia Ambassadeur 4600c — zdjęcie 1
1 / 2

Tornado Magnetic Brake Ring Mod for Abu Garcia Ambassadeur 4600c

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A custom 3D-printable magnetic brake ring ("Tornado-style") designed for Abu Garcia Ambassadeur 4600C baitcasting reels.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
3
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

### Overview / 概要

A custom 3D-printable magnetic brake ring ("Tornado-style") designed for Abu Garcia Ambassadeur baitcasting reels. Featuring a gentle 30-degree slope and outer-edge magnet placement, this mod is engineered to provide a smooth magnetic field gradient and balanced braking performance across spool speeds.

アブ・ガルシア(Abu Garcia)アンバサダーシリーズ等のベイトリール向けに設計した、カスタムマグネットブレーキリング(通称:トルネード式)の3Dプリントデータです。30度のなだらかなスロープと外周側へのマグネット配置により、スプールの回転数に応じたスムーズな磁界変化とブレーキ特性を狙って設計しています。

Note: In my personal testing environment, the casting feel surpasses standard stock brake systems (personal impression only).

※個人のテスト環境および主観的な使用感においては、既存の純正・市販ブレーキシステムを上回る非常に快適なキャストフィールが得られています(※個人の感想です)。

---

### Bill of Materials (BOM) / 必要なパーツ

* Neodymium Magnets: 3.0mm diameter × 2.0mm thickness (Fits up to 20 magnets; adjust the quantity to tune your preferred braking strength).

ネオジム磁石: 直径 3.0mm × 厚さ 2.0mm(最大20個まで配置可能/お好みの磁力に合わせて個数を調整してください)

* Pin Hole Compatibility: Designed for 1.7mm diameter pins.

ピン穴仕様: 1.7mm径のピンに対応

---

### Recommended Print Settings / 推奨プリント設定

* Filament: Heat-resistant and rigid filaments such as PETG, PETG-CF, or ABS (PLA is not recommended to prevent thermal deformation inside hot cars or during summer fishing trips).

推奨素材: PETG、PETG-CF、ABS などの耐熱性・剛性のあるフィラメント(夏場の車内や釣行時の熱変形を防ぐため、PLAは非推奨です)

* Nozzle Size: 0.4mm (or 0.6mm with tuned perimeter wall settings).

ノズル径: 0.4mm(または外周ウォール調整済みの0.6mm)

* Layer Height: 0.12mm – 0.16mm (Finer layer heights are recommended to cleanly render the 30-degree slope and 1.0mm inner chamfer).

積層ピッチ: 0.12mm 〜 0.16mm(30度スロープと1.0mmの内周面取りを滑らかに出力するため、細かいピッチを推奨)

* Supports: None required (Print with the flat bottom face directly on the build plate).

サポート: 不要(底面をビルドプレートに接地させて出力してください)

* Seam Position: Scarf seam or Random seam is recommended to minimize rotational imbalance and physical interference.

シーム設定: 回転バランスや干渉を防ぐため、スカーフシーム(Scarf seam)またはランダム配置を推奨

---

### Disclaimer / 注意事項・免責事項

* This data is an unofficial, fan-made custom mod created for personal hobbyist testing and is not affiliated with or endorsed by Abu Garcia (Pure Fishing). All brand and product names are mentioned solely for compatibility reference.

本データは個人による趣味の設計・検証用カスタムパーツであり、Abu Garcia(ピュア・フィッシング・ジャパン)等のメーカー純正品・公認品ではありません。記載されている社名・製品名は適合確認のための参照用です。

* Minor post-processing (such as light sanding or filing) may be required for proper fitment depending on your 3D printer's tolerances and filament shrinkage.

3Dプリンターの個体差やフィラメントの収縮率により、実機へのフィッティングに微調整(ヤスリがけ等)が必要になる場合があります。

* Print, install, and use this custom part entirely at your own risk.

本データの使用およびリールの改造は、すべて自己責任にて行ってください。

Tagi