MN82 Beadlock Rims / Wheels (Stock, 1.0", & 1.3" Tires)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multi-part beadlock wheels for the MN82 / MN82S. Supports stock, 1.0", and 1.3" tires using either M3 self-tapping screw
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 7
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Custom beadlock-style rims designed for the MN82 RC crawler. They feature an offset similar to the stock wheels and mount directly to the hubs using your original stock axle screws.
All files are pre-oriented for printing and feature built-in supports, so keep slicer supports disabled.
Choosing Your Version (12 Total)
To fit different printers and hardware setups, the files are organized into 12 folders based on 3 options.
Important: The rear barrels and inner inserts are specific to each version. Do not mix and match parts—download only the single folder that matches your exact setup.
Design Style:
Normal Version: An elaborate multi-color design built for filament changers/AMS units (approx. 30 filament changes).
Simple Version: Redesigned so anyone can get a multi-color look on a standard printer using just 3 manual layer swaps (or print it in a single color).
Tire Compatibility:
Stock MN82 tires
1.0" crawler tires
1.3" crawler tires
Assembly Hardware (Choose one):
Self-Tapping: 5x M3x10 self-tapping screws per wheel (20 total for a full set of 4)
Heat-Set: 5x M2.5x8 machine screws + 5x M2.5 heat-set inserts per wheel (20 screws and 20 inserts total for a full set of 4)
(Note: You will also reuse the 4 original stock axle screws to mount the rims to the car.)
Recommended Print Settings
Layer Height: 0.2mm
Walls: 8
Wall Generator: Arachne
Supports: None (built-in)
Version-Specific Slicer Instructions:
Normal Version: Add a height range modifier from 5mm to 9mm set to a 0.08mm layer height to get the smoothest finish on the curved face of the rim.
Simple Version (Multi-color): Add manual filament changes at layers 33, 44, and 55 (when slicing at a 0.2mm layer height).
Assembly Instructions
Remove support piece from Front.
Insert heatinserts if using the M2.5 version.
First put the insert into the tire, keep in mind, stock tires are non-symetric (larger insert diameter towards the tires larger diameter).
Insert the Front into the tire.
Insert Back into the other side.
Screw tight with appropriate screws, remember, this is screws into plastic, so dont overtighten.
Full STEP files are included.
If you like my models and want to support me, you can do that over at https://ko-fi.com/kanrog
Licensing & Support
This design is shared for free under the CC BY-NC-SA 4.0 license. You are welcome to print them for personal use and share your own remixes, provided you give credit and share under the same license. Selling the digital files or physical 3D prints is strictly prohibited.
If you print a set for your MN82, please post a Make—I’d love to see what color combos and tires you pair them with! If you enjoy the design and want to support future projects, you can find my support link on my profile.