1 / 5
Christmas Village 2 – Bakery, Station & Inn — zdjęcie 1
1 / 5

Christmas Village 2 – Bakery, Station & Inn

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A bakery, a station, an inn and a toy shop that glow with an LED tea light, plus lamps, a well and a bridge.

Ocena
0 / 5
Polubienia
1
Pobrania
0
Wydruki
0
Wyświetlenia
4
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

The second part of the Christmas Village (https://www.printables.com/model/1892703). Same scale, same snowy bases, same LED tea light: the four new buildings stand next to the first four as if they had always been there.

The buildings

  • Bakery (66 × 70 × 85 mm): white plaster, green shop front with small panes, red and white striped awning, raised BAKERY sign, pretzel above

  • Railway station (86 × 84 × 87 mm): pink sandstone with grey quoins, green canopy with a white valance on cast-iron columns, platform and track, a clock on each gable, raised STATION sign

  • Inn (68 × 75 × 82 mm): white ground floor, weathered grey boarding above, balcony with slats and brackets, green shutters, stacked firewood with snow on top, raised INN sign

  • Toy shop (66 × 68 × 86 mm): green walls, candy-cane pilasters, red TOYS sign, red shutters and a snowy wreath

Accessories (no tea light)

  • Two street lamps (64 mm), one with a red bow. The post is 4.5 mm thick, so it stands firm

  • A stone well with a snowy rim, a red bucket and a shingle roof that sits on two pegs

  • A small stone bridge with a pointed arch, snow on the deck and on the parapets

How it works

  • Every building stands on its own snowy base, which is also the floor

  • A ring in the floor centres any Ø 38 × 16 mm LED tea light; a Ø 16 mm hole underneath lets you push it out or reach its switch

  • The roof lifts off. Two rails under it slide inside the walls with 0.3 mm clearance, so it sits square and cannot slide off

  • The chimney plugs into the ridge

  • LED tea lights only, never a real candle

Print settings

  • PLA, 0.4 mm nozzle, 0.2 mm layers, 3 perimeters, 15 % infill

  • No supports and no brim. Bodies and roofs print upright, chimneys upside down, exactly as placed in the 3MF files

  • Slopes stay within 40° of vertical and no bridge is longer than 5 mm. The awning, the canopy and the balcony have sloped undersides, the window panes are under 4.6 mm wide, and the letters stand out by half a millimetre

  • On an INDX, a building takes 3.5 to 5.5 hours and 57 to 78 g (body, roof and chimney together); the accessories take 2.5 hours and 37 g. On an MMU3, count 7.5 to 12 hours because of the colour changes

Files

  • Model files: one 3MF per building, with the body, the roof and the chimney on the same plate, already coloured, and one 3MF for the accessories. The slots are the same as in the first village: 1 red, 2 white, 3 grey, 4 green, 5 pink (pink is only used on the station).

  • G-code: ready to print, one file per building and per printer: Core One INDX 4T, Core One INDX 8T, MK4S + MMU3 and Core One + MMU3. Prusament PLA, 0.20 mm layers, 3 perimeters, 15 % infill, no supports. Load the filaments in the slot order above.

  • Four tools are enough for everything except the station: its INDX 4T G-code prints the pink sandstone in white. For the pink version, use the INDX 8T or MMU3 file, or the 3MF.

  • Other files: single-colour STL files (zip) and the parametric Python source (zip).

  • Single colour: white or grey looks great once lit.

Make it yours

The whole village comes from the same parametric Python script (manifold3d) as the first one: sizes, roof pitch, tile style, snow line, windows, shutters, signs and their lettering. The script checks that each part is one piece, that nothing overhangs past 40° apart from sub-millimetre ledges, that every bridge is under 5 mm, that the tea light fits and touches nothing, and that each roof and chimney seats with its clearance.

Designed with AI assistance (parametric Python script).

If you print one, I'd love to see a make. I reply to every one.

En français

La suite du village de Noël (https://www.printables.com/model/1892703). Même échelle, mêmes socles enneigés, même bougie LED : les quatre nouveaux bâtiments se posent à côté des quatre premiers comme s'ils avaient toujours été là.

  • Boulangerie (66 × 70 × 85 mm) : enduit blanc, devanture verte à petits carreaux, auvent rayé rouge et blanc, enseigne BAKERY en relief, bretzel au-dessus

  • Gare (86 × 84 × 87 mm) : grès rose et chaînes d'angle grises, marquise verte à lambrequin blanc sur colonnettes, quai et voie, une horloge sur chaque pignon, enseigne STATION

  • Auberge (68 × 75 × 82 mm) : rez-de-chaussée blanc, planches grises à l'étage, balcon à claire-voie sur consoles, volets verts, bois empilé sous la neige, enseigne INN

  • Boutique de jouets (66 × 68 × 86 mm) : murs verts, pilastres en sucre d'orge, enseigne TOYS rouge, volets rouges et couronne enneigée

  • Accessoires sans bougie : deux lampadaires (64 mm, fût de 4,5 mm, l'un avec un nœud rouge), un puits en pierre avec seau et toit posé sur deux tenons, un petit pont de pierre en arc brisé

Le socle de neige sert de plancher ; un anneau centre une bougie LED Ø 38 × 16 mm et un trou de Ø 16 dessous permet de la pousser ou d'atteindre l'interrupteur. Le toit s'enlève : deux rails glissent dans les murs avec 0,3 mm de jeu. La cheminée se plante dans le faîtage.

Impression : PLA, buse 0,4, couches de 0,2, 3 périmètres, 15 % de remplissage, sans support ni bordure. Corps et toits debout, cheminées tête en bas, comme dans les 3MF. Pentes à 40° de la verticale au plus, aucun pont de plus de 5 mm. Sur INDX, comptez 3 h 30 à 5 h 30 et 57 à 78 g par bâtiment, 2 h 30 et 37 g pour les accessoires ; sur MMU3, 7 h 30 à 12 h à cause des changements de couleur.

Fichiers : un 3MF par bâtiment (corps, toit et cheminée sur le même plateau, déjà en couleurs) et un pour les accessoires. Emplacements identiques au premier village : 1 rouge, 2 blanc, 3 gris, 4 vert, 5 rose (le rose ne sert qu'à la gare). G-code prêts à imprimer pour Core One INDX 4T et 8T, MK4S + MMU3 et Core One + MMU3. Quatre outils suffisent partout sauf pour la gare : son G-code INDX 4T imprime le grès rose en blanc ; pour la version rose, prenez le fichier INDX 8T ou MMU3, ou le 3MF. STL d'une couleur et source Python dans les fichiers annexes.

Conçu avec l'aide de l'IA (script Python paramétrique).

Si vous en imprimez une, postez une fabrication : je réponds à chacune.

Tagi