1 / 3
Modular No-Spill Dog Food & Water Tray — zdjęcie 1
1 / 3

Modular No-Spill Dog Food & Water Tray

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modular no-spill dog feeding tray with backsplash & raised lip. Locks ~19mm stand legs in place to keep floors clean!

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
2
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Apache License 2.0
Keep Your Floors Clean & Bowls Locked In

I've just adopted an elderly dog and I've just realized the place where they eat is usually a mess! The water spills out, food is around the floor, and the wood starts to crack open... So I decided to design a modular feeding station that keeps food, water, and even your dog's favorite toy neatly contained in one place.

Key Features
  • Raised Perimeter Drip Lip: A continuous outer border catches water spills and stray kibble before they reach your floor.

  • Wall Backsplash: Features a tall rear guard with embossed "Dog Feeder" lettering to protect walls and baseboards from splashes.

  • Lock-In Stand Channels: The right-hand bay includes two parallel raised slots that anchor an elevated bowl stand so it won't slide around while your dog eats.

  • Dedicated Bowl Bay: The left-hand side provides a flat, contained platform for a standard water or food dish.

  • Two-Part Modular Design: Splits cleanly down the middle into two interlocking halves so it fits easily on standard 3D printer build plates.

  • Size: 400x250x8mmtray. It is small enough to fit in standard 3D printer beds, while being big enough to fit general feeding items on it.

Stand Compatibility

The right-side locking channels are designed with 19mm of clearance to accommodate a variety of elevated feeder stands.

Personally tested with a 17mm-thick stand, giving a snug, rattle-free fit that still allows easy removal for cleaning.

Mine in particular is the leeby elevated dog stand one, with the dimensions above.

Printing & Assembly Notes
  • Material: PETG or PLA+ is recommended for better moisture resistance and easy wiping (shown printed in marble-effect filament).

  • Layer Height: 0.2mmis enough

  • Infill: 15%cubic subdivision for optimal plastic usage

  • Supports: standard supports just for the dovetail keys for easier installation

The rubber-like pieces at the bottom are door bumpers made of silicon whose diameter is 23mm. They're used to protect furniture but are a great support and prevent the piece from sliding.

NOTE: The image above is a reference. Make sure you look for 23mmdiameter ones!

To assemble:

  • Glue the door bumpers used as supports with some super glue

  • Join the 2 upper and lower modules together

  • Put a small drop of glue if you want a seamless join

  • Finally join the upper and lower pieces together, using a little bit of glue for a perfect join

Tagi