1 / 3
TP4056 18650 Holder Charger for off-the-shelf battery tray
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My remix of @zeroeffekt_280679's 18650 battery charger to use some off-the-shelf battery holders I had lying around.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 1
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I had some of these 18650 batter holders laying around doing nothing, so here's my remix of zeroeffect's battery holder for charging with a TP4056.
https://www.amazon.com/LBTODH-Battery-Holder-Storage-Plastic/dp/B092TGQ7PB
Printed with SUNLU PLA+ or PLA+ 2.0 and goober-soldered together like shown. I should probably glue the tray in there as sometimes it starts to pull out of the holder when removing the battery.