1 / 5
Jackery Explorer 2000 Cap – DC Jack + C14 Inlet (1 or 2-Part Print) — zdjęcie 1
1 / 5

Jackery Explorer 2000 Cap – DC Jack + C14 Inlet (1 or 2-Part Print)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cap for the Jackery Explorer 2000 with cutouts for a DC input jack and a C14 AC inlet. Two versions available.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
4
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

## Jackery Explorer 2000 – Cap with DC Jack & C14 Inlet

Replacement / add-on cap for the Jackery Explorer 2000. Gives a clean panel for a DC input jack and a C14 AC inlet instead of loose cables.

## Versions

| File | Size (mm) | Notes |
| -------------------- | ---------------- | ---------------------- |
| Jackery_Kappe v6.stl | 62 × 32 × 12.2 | complete cap, one part |
| Teil_1_DC.stl | 23.5 × 32 × 12.2 | split half, DC side |
| Teil_2_C14.stl | 38.5 × 32 × 12.2 | split half, C14 side |


The split version is the same cap cut at the middle. Both halves have a flat mating face, no alignment pins - align on the outer edges and glue (CA or 2-component epoxy). Use it if your bed is too small for the full cap, or to print the two halves in different colors.

Teil_1_DC.stl + Teil_2_C14.stl together = Jackery_Kappe v6.stl.

Tagi