1 / 3
Fascia Board Light Mounting Clamp — zdjęcie 1
1 / 3

Fascia Board Light Mounting Clamp

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clamp for mounting stringlights etc along the bottom edge of 20mm thick fascia board without leaving permanent marks.

Ocena
0 / 5
Polubienia
1
Pobrania
0
Wydruki
0
Wyświetlenia
5
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

I needed a way to mount christmas lights along the bottom edge of the fascia board underneath the gutters without leaving permanent marks, the boards I have are pretty much exactly 20mm thick, the teeth are designed to grip onto the rough texture of the boards when pressure is applied to the hook. I stress tested it by hanging a jacket on the hook and it stayed all night with standard PLA. 
If your boards aren't exactly 20mm you can either resize it in your slicer or just heat it a little and bend the arms. 

Tagi