Throttle with 7 axis and 32 buttons
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Throttle with 7 Axes and 24 buttons (32 -> 2 HAT Switches) This project uses an Arduino Micro and 2 MCP23017 shift…
- Ocena
- 0 / 5
- Polubienia
- 65
- Pobrania
- 187
- Wydruki
- 0
- Wyświetlenia
- 2225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Throttle with 7 Axes and 24 buttons (32 -> 2 HAT Switches)
This project uses an Arduino Micro and 2 MCP23017 shift register for all the buttons.
Since I am very lazy on documentaton i added the step file also.
For the electronic part just search for Arduino Joystick Library Examples.
To add friction, you can place a rubber between the top Plate and the main holder (near the bigger gears)
Additional Hardware used:
1x Arduino Pro Micro
breadboard with holes
connectors (male & female)
32x push buttons
7x 10kOhm potentiometer
2x MPC23017
2x 608 Bearing
threaded inserts
srews
cables
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Supports:
Yes
Resolution:
0,2
Notes:
most of the parts are designed to print without supports.
Category: Toys & Games