18650 / 18700 Protected Cell - Dual Battery Holder / Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits perfect for longer protected cells and also for the shorter non protected ones.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 201
- Wydruki
- 0
- Wyświetlenia
- 1141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This dual battery holder fits perfect with longer 18650 / 18700 cells.
I made some changes from the Thingiverse version (thanks to Shadow8286 )because the original could not hold my 70mm long cells not very good and it was hard to insert/remove them.
There is also a very tight fit bottom cover to hide the cables and connection pins.
For use in series or parallel - just by soldering to the right pins.
You will need cell clips i.e. from Aliexpress with 18,5x16mm.
https://de.aliexpress.com/item/1005003381748334.html?spm=a2g0o.order_list.0.0.54f15c5fj7PHWi&gatewayAdapt=glo2deu
Print with PLA, PETG or what ever you want.