1 / 4
Arduino Rice Cooker Sous Vide
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The longest part of this build is waiting for the enclosure finish printing. If you need a guide for this, just follow…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 275
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The longest part of this build is waiting for the enclosure finish printing. If you need a guide for this, just follow the Sous Viduino by Adafruit.
My Arduino code.
A quick breakdown on my specific setup:
- Arduino as the brain, and Uno because I want to use the LCD Shield.
- LCD shield to simplify things. I’ll have buttons for interface. Up / down to control the temp by 0.5ºC increments, left / right control by 5ºC. The set button to start and stop the PID.
- Temperature sensor as PID input, I use the type K with MAX6675, because I bought quite a few of this right before people jump to MAX31855. Even the DS18B20 will do just fine.
- Fotek 40A SSR is fine, it’s good enough to control the rice cooker. Utter shit as a product, I wouldn’t trust it as mission critical projects, but I already have 4 of them because they’re like less than $2 each.
- And I can’t remember the exact module code for the Aliexpress AC to 5VDC module to power the Arduino from the same plug. 12VDC into Vin pin would be better, but regulated 5V into the 5V pin is fine.
Category: Kitchen & Dining