Solid Bed Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's just a 20mm tube?!! Yes, yes it is. If you have z-probe sensor up and running, I highly recommend replacing your…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 399
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
It's just a 20mm tube?!!
Yes, yes it is. If you have z-probe sensor up and running, I highly recommend replacing your spring mount to this. This way, you remove the spring as a variable. The bed will be as level as the table your printer is sitting on.
You can adjust the height directly on your slicer. I made it 20mm because I have 10mm bed insulation on the way. I'd like a bit more clearance from the bracket.
Print 4 of this. ABS is ideal, or anything that can handle the maximum heat you plan for your prints.
Category: 3D Printer Accessories