Zino Mini Pro Cooler Stand (alt)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I noticed my Hubsan Zino Mini Pro self shout down when downloading videos to the computer or exploring the menus at…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 270
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I noticed my Hubsan Zino Mini Pro self shout down when downloading videos to the computer or exploring the menus at home so I decided to search for a cooler stand.
I found one from @luigisvc that looks nice (https://www.thingiverse.com/thing:5255487) but I wanted to do it in a different why in two areas:
The air flow goes from front-down to the back side. No hot air hits ever the gimbal (the design allows for the gimbal to move free when the drone is at the stand.
The number of pieces to print is reduced to the minimum (two)
The two pieces must be glued together. Find three pictures provided:
- The drone attached to the stand
- The two pieces just printed. You can see the support and how I printed them
- The two pieces glued with 5 minutes resine
About the fan. I used a Noctua https://noctua.at/en/nf-a4x10-flx 5v it has cables to plug it to USB directly
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0,20
Infill:
15%
Filament: Prusa PETG Orange
Notes:
Support is required. Used PETG to avoid deformation due to high temperature of the dron low side
Category: R/C Vehicles