1 / 3
MagSafe NFC Hole Insert/Covercap — zdjęcie 1
1 / 3

MagSafe NFC Hole Insert/Covercap

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cover an NFC tag/sticker placed in a 15W Apple MagSafe cavity of a pre-existing product or 3D Print

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
3
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial

Demo stand shown in picture

Intended to cover an NFC tag/sticker placed in a 15W Apple MagSafe cavity of a pre-existing product or 3D Print (i.e., a watch charger attached to a phone dock).

The slot in the middle is used to make it easier to pull out the insert, as it's purposely a tight fit at 55.9 mm (diameter). I used Creality PLA.

Tagi