E3D v6 Two Fan with Ring blowing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
E3D v6 Two Fan with Ring blowing Two new files These have a deeper air ring design that should allow greater air flow…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 239
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
E3D v6 Two Fan with Ring blowing
Two new files
These have a deeper air ring design that should allow greater air flow round and through the gap in that ring. You can turn air flow down, using PWM, but not increase it from the maximum.
E3D v6 Two Fan Ring More Blow Fan Paper Test {Powerful} 50% fan speed should be enough using this:- https://youtu.be/Fzm79LDLCQE
This is a two fan fan shroud it is in two half's that bolt clip onto the E3D v6 Hot End
This build is based remixed from Techtiptricks E3D V6 Extruder Mount.
It is a two fan system that blows a ring of air round the part being printed and a separate fan to blow air across the E3D v6 fins.
I would like to acknowledge Techtiptricks E3D V6 Extruder Mount* more below
E3D v6 Two Fan Ring blowing fan Paper Test
The file only has the name "BLTouch???" in it because I use one of these for auto-levelling; this should have no impact on fitting.
E3D V6 Techtiptricks Mount with dual cooling fans Files available here: http://hypedphoto.com/storage/E3D_V6_Extruder_Mount.zip
Category: 3D Printer Extruders