Housing for AKKtek A3 3 in 1 camera module
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The All-in-One camera module from akktek.com is just an electronics module without any housing and support for…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
The All-in-One camera module from akktek.com is just an electronics module without any housing and support for attaching to a r/c model.
Although it could be attached by using just some double-sided tape, this would not be robust and reliable enough for various types of applications.
I am using the module on r/c boats, therefore I have coated the electronics with rubber spray to make it somewhat water-resistent.
My housing allows easy attachment by either double-sided duct tape or velcro while not blocking the air flow through the module as is required for cooling.
There are four versions, a very lightweighted housing to be used e.g. for small Tinywhoop copters and three more robust versions if weight and size does no matter that much.
Print Settings
Printer:
Anycubic I3 Mega
Supports:
Yes
Resolution:
0.1 or 0.2 mm
Category: R/C Vehicles