Festool MFT/3 Bench dog (customizable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bench dogs for Festool MFT/3 table Inspired by the QWAS dogs: https://www.ultimatetools.ca/products/qwas-…
- Ocena
- 4 / 5
- Polubienia
- 75
- Pobrania
- 243
- Wydruki
- 2
- Wyświetlenia
- 2248
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Bench dogs for Festool MFT/3 table
Inspired by the QWAS dogs: https://www.ultimatetools.ca/products/qwas-dogs?variant=16578902
Surprinsingly useful accessory for your MFT table:
- use them as a stopper to get perfect 90° angles
- use them as risers (bench cookies) for sinding/grinding by printing the top layers using filaflex
- print longer benches and add a screw to make a guiding rail's support
- use two bench dogs to calibrate your guiding rail on the table
Size can be customized to fit your specific needs (display may be incomplete)
Don't have an MFT table? Try this: https://www.thingiverse.com/thing:2079995
Print Settings
Rafts:
No
Supports:
No
Infill:
50%
Notes:
Use 50% ot higher infill for strength, ABS or PLA
Use high temp (PLA => 110/120°C) for better layer adhesion
Green color is mandatory ;-)
This model has two nuts included inside the print.
Pause print when it reaches the top of each nut hole, install the nut inside the hole, and unpause the print
You can also print the first layers using flexible filament to get an anti-slip top on the bench dog.
Start your print using the flexible filament, pause after a few millimeters, and switch back to PLA/ABS
Post-Printing
Use a long screw through the two included nuts for increased strength of the bench dog, and added weight
You may need to sand the peg a bit so that it just snaps into the table's hole
Metric Nuts size
If you want to use a different nut size, here are the measurement for various ones
// M3
nut_diameter=6.01;
nut_inner_diameter=3;
nut_height=2.4;
// M6
nut_diameter=12.30;
nut_inner_diameter=6.45;
nut_height=5.65;
// M8
nut_diameter=14.38;
nut_inner_diameter=8;
nut_height=6.8;
// M10
nut_diameter=17.77;
nut_inner_diameter=10;
nut_height=8.4;
Category: Hand Tools