Aero-tek P'tiot - Piko BLX slim conversion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
What-is it? 3D printed parts to convert aero-tek "Le P'tiot" quadcopter to a slim profile using Piko BLX flight…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
What-is it?
3D printed parts to convert aero-tek "Le P'tiot" quadcopter to a slim profile using Piko BLX flight controller
Benefits
Integrated PDB allows a thinner body and cleaner wiring
Saves some weight (=~10%)
Battery is nearer to the COG
Camera can be adjusted with higher tilt without the frame obstructing the view
Post-printing
You will need to cut an opening in the upper frame for the camera tilt, and shorten the provided screws
Parts
Aero-tek Ptiot: http://aero-tek.eu/shop/fr/packs-et-kits/216-p-tiot-fpv-complet-a-monter.html
Furious FPV Piko BLX: http://furiousfpv.com/product_info.php?products_id=41
There's just enough place for a naked D4R-II or X4R-SB Frsky receiver, but I'd recommand using a micro-rx to save space and weight (eg. for a buzzer)
Update 2017-02-19
Added holes for screws to the camera support, so that the camera doesn't shift angle so easily
Adjusted the arm's endstop height
Category: R/C Vehicles