Gopro mount for Vivitar 360 sky eye drone
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Frustrated by the low quality and fish-eye video from the stock camera, I decided to improve things. This gopro mount…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Frustrated by the low quality and fish-eye video from the stock camera, I decided to improve things.
This gopro mount will attach to the existing shock mounts on the drones camera mount. The shock mounts can be removed from the original camera plate by pinching them down to pop them out of the holes. Then you pinch them in to insert them into this printed plate. Make sure you pay attention to the orientation of the mount plate. The wide gap is the front.
NOTE: The added weight of the gopro reduced flight time from 10 to about 2 minutes. The drone does struggle a bit, but is stable enough for good photography over the shorter flight.
Category: R/C Vehicles