Mendel Upper Z supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
EDIT: Updated the bracket slightly. Lengthened it by 1mm to accommodate a washer between the coupler and the bearing,…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
EDIT: Updated the bracket slightly. Lengthened it by 1mm to accommodate a washer between the coupler and the bearing, and widened it slightly for better alignment with the stepper motor screws.
This is an update to my Z support for the Prusa Mendel I2. Unlike the previous version, these should fit all I2 Prusas without any modification to the source model.
I have a video on YouTube that covers the design and, although a bit long, I cover a few things about assembling this that will save you some time and make things go together easy.
I think something like this should be included in the original design, Z creep is a problem that is completely solved by this.
YouTube video linked below. If you build this for your printer, let me know how it works for you and/or post a pic here under the "I made one" area.
Category: 3D Printer Parts