1 / 1
Faceted Bowl
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My second 'from scratch' bowl/vase type design. This one is a faceted spherically shaped bowl. I don't have a picture…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
My second 'from scratch' bowl/vase type design. This one is a faceted spherically shaped bowl. I don't have a picture yet as mine is printing while I type. I had to use support on the exterior for the print due to the extreme angles. I would also suggest a minimum of 4 perimeters on this print.
Instructions
To print this hollow, use 0% infill and at least 4 perimeters. I'd also suggest a bottom thickness of no less than .6mm.
Category: Sculptures