Gotek Mounting Bracket For Checkmate 1500 Plus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple bracket to mount a Gotek floppy emulator in your Checkmate 1500 Plus using the optional 3-1/2" floppy insert.…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 375
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple bracket to mount a Gotek floppy emulator in your Checkmate 1500 Plus using theoptional 3-1/2" floppy insert. There is an arrow indicating the direction to the front of the case.
Note: This might also work for mounting a floppy drive, it is untested currently.
You'll need Qty 4 of any of the following:
Number 3-24 x 3/8" Plastite screw
Number 4-20 x 3/8" Plastite screw
Equivalent sheet metal screw
Equivalent metric screw (something around M3)
I've provided 4 file types which are supported by most slicers:
3MF
STL
AMF
GLB
Print Settings
Printer Brand:
Anycubic
Printer:
Kossel
Rafts:
No
Supports:
Yes
Resolution:
.2mm
Infill:
15%-20%
Filament: Solutech PLA Blue, but any color will do.
Notes:
Supports are needed for the Gotek mounting holes.
How I Designed This ===================
Solidworks 2015, 8" digital calipers
Category: Computer