Checkmate A1500 Plus Gotek Panel

UPDATE:

A raft is not require for this part. I erroneously indicated it was needed. But, it would be wise to use a 5mm-10mm brim to minimize or prevent corner lift.

What's this for?

This is a Gotek panel for Stephen Jones' epic Checkmate A1500 Plus computer case. The case allows use with the Commodore Amiga A500(+), A600, and A1200 motherboardsOR PC ITX motherboards.

What does it do?

This panel allows you to use a Gotek drive in the A1500 Plus case. It incorporates a 0.96" OLED screen and a rotary controller. Of course, to use the two latter items you'll need to flash the Gotek with Keir Fraser's excellent FlashFloppy firmware.

Files

Gotek_Panel_FSB_Centered_Rot.stl

Gotek_Panel_FSB_Centered_Rot_One_LED.stl

Gotek_Panel_FSB_Flush_LEDs1.stl

Gotek_Panel_FSB_One_Flush_LED1.stl

Gotek_PCB_Base1.STL

Bill of Materials (BOM)

Rotary Encoder w/ push button (This link will change, in that case, look for a PEC11-like rotary encoder) https://www.ebay.com/itm/US-3Pcs-6mm-Shaft-Dia-20-Position-5-Pins-360-Degree-Rotary-Encoder-w-Push-Button/233381032061

This rotary encoder can be used also: https://www.digikey.com/product-detail/en/bourns-inc/PEC11L-4220F-S0015/PEC11L-4220F-S0015-ND/2440942

0.96" OLED Display 126x64 https://www.ebay.com/itm/US-0-96-I2C-IIC-Serial-128X64-LED-OLED-LCD-Display-Module-for-Arduino-White/322520336866

M1.7x5mmx5mm 304 Stainless Steel screw For holding the OLED panel in place https://www.ebay.com/itm/M1-7-M2-304-stainless-steel-Flanged-Pan-Washer-Head-Phillips-Self-Tapping-Screws/132702202322

4-20 x 3/8" 'Plastite' screw (or metric variant, or sheet metal screw) For securing Gotek PCB and Gotek PCB Base together and to case https://www.amazon.com/Thread-Rolling-Plastic-Plated-Phillips/dp/B00GDYGO5M/ref=sr_1_1?keywords=Plastite+3%2F8&qid=1585607647&sr=8-1

OR (You don't need both.)

3-24 x 3/8" 'Plastite' screw (or metric variant, or sheet metal screw) For securing Gotek PCB and Gotek PCB Base together and to case https://www.amazon.com/Thread-Rolling-Plastic-Finish-Phillips/dp/B00GDYDCC0/ref=sr_1_10?keywords=Plastite+3%2F8&qid=1585607706&sr=8-10

Print Settings

Printer Brand:

Anycubic

Printer:

Rafts:

No

Supports:

Resolution:

.25mm

Infill:

Filament: Solutech PLA Blue

Notes:

Category: Computer