PK8 Endstop Fine Tuner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Remix of the great "Anet A8 Z Endstop Fine tuner" by klownius. I had this installed before upgrading my A8…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a Remix of the great "Anet A8 Z Endstop Fine tuner" by klownius:
https://www.thingiverse.com/thing:2172190
I had this installed before upgrading my A8 to a PK8 metal frame design. The original PK8 Z-Limit switch is non adjustable, so i simply made my own holding bracket for the limit switch to fit the PK8.
It might also fit the AM8, i am not sure though.
Designed to fit the M5x10 Screws that were used with the PK8 originally, you can drill small holes (i used 1.5mm) for pre-positioning the Switch.
I also added my Fusion 360 File for the Switch holder, so you can change any dimensions you need to change.
Print Settings
Printer:
PK8
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
40%
Filament:
Geetech PLA
red
Category: 3D Printer Parts