Tatting Shuttle Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a work in progress. It's a container shaped like a tatting shuttle. The inside container part isn't very big.…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 314
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a work in progress. It's a container shaped like a tatting shuttle. The inside container part isn't very big. It could hold crochet hooks or tatting needles.
I printed it in both wood PLA and blue ABS (both pictured).
I stood the main body on end, opening side down, to print.
I printed the top with curve top up and used supports.
I plan on improving the top to have threads.
Print Settings
Printer Brand:
PowerSpec
Printer:
PowerSpec 3D Pro
Rafts:
Yes
Supports:
Yes
Resolution:
High
Notes:
I printed these at .10 thickness with wood PLA and blue ABS. It took 14 hours for the body and about 1.5 hours for the top.
After printing, I sanded and painted with primer filler, sanded again with 2000 grit sandpaper, then painted with white primer. I used alcohol ink for the wood grain look and resin to make it shine.
How I Designed This
I used Fusion 360 to create this
Category: Containers