Sunfounder 10 inch screen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
10 inch screen reference 3d model for your own design. A system to bring out the switches to the front. Case
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 1060
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
I needed a case for my Pi 4 and my Sunfounder 10 screen. I designed a model of the screen which I used for design. Its included for use in your own desing.
I used it to create a switch assembly to move the switch motion to the front.
I created a case that can be printed has a hole unit with a back or as 4 pieces glued together and a back.
To insure a fit to the screen I printed the front backing separate. Just lay it down on something flat, put the case on top and glue in place.
Hope this is useful in some way.
Cheers
Kisssys