ReefDelete Button Helper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With the new ReefDelete the button is quite stiff. It does indeed get better with age but the small button still digs…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
With the new ReefDelete the button is quite stiff. It does indeed get better with age but the small button still digs in to the thumb and you can't always see the light to know its on.
This button corrects this with out holding the button on for you so all safety features still work.
This is a simple slip on design which is made to an very tight tolerance so needs flexing to fit. the design is a c-clip so it allows this. it does move but does not really move while using.
The button only needs about 1mm of pressing to engage and is preloaded by 0.5mm so the flex needed in the PETG is minimal and the layer lines are not a weak point. This means you can print this with ZERO supports.
The larger Button area on the printed part makes this much comfier for prolonged uses making this product more effective as you are able to administer longer doses.
Print Settings
Printer:
Sapphire Plus
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
100
Filament:
eSUN PETG
Orange
Category: Hobby