Prusa I3 MK2S filament guides
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my solution for filament guide in a Prusa i3 MK2S clone to be used in a Lack enclosure when Dondolo extruder…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 272
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my solution for filament guide in a Prusa i3 MK2S clone to be used in a Lack enclosure when Dondolo extruder is used.
I mixed up two different solution to get my requirements.
Since I don't want to feed filament from top, I want to easily remove enclosure cover, I choosed to feed from bottom and hence I need a light filament bending.
Printed and tested but not yet with enclosure
Print Settings
Printer:
Prusa i3 MK2S DIY clone
Rafts:
No
Supports:
No
Resolution:
0.1mm
Infill:
50%
Notes:
I printed with 0.1mm resolution and 30mm/s for all print movements to get a very smooth surface on bushing.
Category: 3D Printer Parts