CR-10 Direct BMG with e3d V6
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Got tired of having my bmg always jamming due to the bowden setup, I decided to go direct drive. I looked at other…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 565
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Got tired of having my bmg always jamming due to the bowden setup, I decided to go direct drive. I looked at other offerings on thingiverse, but decided to create my own version which is smaller and more compact with 4 points of connection to the gantry plate. There is also a Hook to zip tie the wire loom back to the board.
I decided to reuse the original part fan and cooler. Went with hurzhurz design. which is linked here, but I didn't like the part fan shroud, so I chopped it off and used the original shroud I have.
Category: 3D Printer Extruders