Lamp for garden railway andreas cross / cross buck
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lamp and holder for garden railway andreas cross / cross buck // Lampe und Halter für Gartenbahn-Andreaskreuz
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 398
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This lamp&holder attaches a 300mm andreas cross / cross buck replica with 28mm lamp hole to a round fence post.
I used this andreas cross: https://www.modell-werkstatt.de/andreaskreuz-mit-oeffnung
I cut a development circuit board into a circle shape and put 12 3mm LEDs on it. The lamp glass has a defractor pattern, but it turned out to be insufficient, so I put some translucent plastic in there too.
There are cable ways to the side and down.
The holder and lamp shade are printed in black HF-ABS, the lamp glass in ice blue PLA. The prints have been outside in the sun and weather for a couple years already, and there are no visible effects on the parts.