1 / 4
T12 soldering tip case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for 6x T12 soldering tip.
- Ocena
- 4,667 / 5
- Polubienia
- 21
- Pobrania
- 141
- Wydruki
- 6
- Wyświetlenia
- 1170
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 6) (Komentarze: 12)Remiksy (0)Kolekcje (44)Powiązane
I have several T12 tips laying around so I've created case for them. The hinge is fitted with 1.75 filament piece so no screws/metal rods are necessary. The locking mechanism is a little bit larger (the tip of it) so you can cut it down with pliers to fit your preffered stiffness.
Reccomendations:
- Print in PETG if possible,
- Print only caseBottom_test to test if the sanppiness of the holder is ok for you and the hole in the ginge allows insertion of 1.75 filament piece.