Samsung SmartThings Multipurpose Sensor 2nd-Gen Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple spacer for the Samsung SmartThings Multipurpose sensor (2nd-gen). As I started peppering these around…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 292
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This is a simple spacer for the Samsung SmartThings Multipurpose sensor (2nd-gen). As I started peppering these around the house I noticed that I needed at least three different spacer sizes. First I started with a rectangle, but that didn't look very finished. Then I traced the main part of the sensor and used Gimp to create a path of that trace. Saving the path to SVG I was able to import that as a sketch and extrude it to the proper height.
The lines aren't perfect, but it doesn't look too terrible.
Printed in PLA with a 15% infill.
Hopefully this is helpful for anyone else.
Print Settings
Printer Brand:
SeeMeCNC
Printer:
Rostock Max v3.2
Infill:
15%
Filament:
Microcenter PLA
Category: Household