Peugeot 306 Cup Holder (Center console)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cup Holder for Peugeot 306 that doesn't have rear electric windows or front heated seats. Printed in two pieces. Glue…
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 331
- Wydruki
- 2
- Wyświetlenia
- 2297
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
Cup Holder for Peugeot 306 that doesn't have rear electric windows or front heated seats.
Printed in two pieces. Glue together after post processing and painting. For best printing results print in orientation that's shown in pictures.
For post processing were used epoxy primer and textured bumper paint.
Sand down visible print layers with 80#/100# grid sandpaper, than paint with epoxy primer, wait till dry and repeat until the surface is enough smooth. After that paint 2-3 coats of textured bumper paint. Wait for it to dry and then glue together with a glue of your choice ( I used superglue with baking soda)
Category: Automotive