Runout Anywhere Redu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was looking for a method of having Octoprint sense filament runout. Stumbled across:…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I was looking for a method of having Octoprint sense filament runout. Stumbled across:
https://www.thingiverse.com/thing:3665614
I found the sensing in rwmech's thing a bit unpredictable - there was too much space around the filament guide and not enough room for the switch in the open position.
Using rwmech's recommended ESP8266 and a kw11-3z switch I found the relative placement of parts pretty consistent and hence this design.
Follow rwmech's instructions but note that the sketch needs to be modified slightly: All the occurrences of
http.begin(
need to be revised to
http.begin(client,
(I'm using the 1.8.13 version if Arduino IDE)
Print Settings
Printer:
BIQU B1
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament:
PolyMaker PLA
Category: 3D Printer Accessories