ChIPs - polycube construction set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ChIPs is a construction set that will allow you to build any polycube from only 4 different panels.
- Ocena
- 4,667 / 5
- Polubienia
- 23
- Pobrania
- 69
- Wydruki
- 2
- Wyświetlenia
- 682
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution
ChIPs (Choon way's Interlocking Panels)
With only four different types of panels you can build any kind of polycube you wish. Including tables. The panels connect to each other using bumps and indents on the contact faces on the finger joints.
In the builds I have posted, panels 1, 2, 3 and 4 are blue, white, yellow and orange respectively.
(updated 21st June 2022)
-renamed voxel shapes to polycube
Important!!!
The .3mf and compiled .gcode files are for unattended mass printing (36x) on an UNMODIFIED Prusa MINI/MINI+ ONLY! The printing path has been planned in such a way that the PINDA sensor will not hit the completed instances.
The slow printing times (3-4hrs) is due to the extremely low first layer speeds. Some filaments have problems when transitioning over from one completed instance to another. The provided speeds are very conservative. You will need to experiment a little if you want to print faster.
Please see the .3mf files for detailed printing settings.
I am in the process of further developing these models and refining the print process, looking forward for your support! Thanks!
“Spiral Vase" and ”Complete Individual Objects" combined.