1 / 4
Metro Shelving Label — zdjęcie 1
1 / 4

Metro Shelving Label

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A snap on label for Metro brand commercial wire shelving.

Ocena
0 / 5
Polubienia
18
Pobrania
122
Wydruki
0
Wyświetlenia
597
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This is a tag/label for Metro commercial wire shelving units. The tag snaps onto the front of the wire shelving and you can drop a piece of paper or cardstock into the slot on the top.

This may not work with off-brand versions of the wire shelving found at discount stores. They tend to have a size that is not identical to Metro brand shelves. Check the dimensions that I provide.

The slot for the tag is 33.5mm x 68mm.

Print Settings

Printer: Ender 3 Pro w/ direct drive

Rafts: No

Supports: Yes

Resolution: 0.15-0.2mm

Infill: 15% or higher

Shells: 2+

Note:

Print with supports, “support everywhere” in Cura.

Tagi