USB Braided Cable Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I really liked the simplicity of this design. I needed something a little larger for my fat fingers and wanted the…
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 64
- Wydruki
- 2
- Wyświetlenia
- 310
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really liked the simplicity of this design. I needed something a little larger for my fat fingers and wanted the slot deeper so more of the cable was enclosed. I increased the diameter of the clip and indented the slot more (about 3/4 the cable diameter from the outside edge).-
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Filament:
RepRapper PETG
Red
Notes:
This is some leftover filament I had
Bed Temp: 85/80Nozzle: 245
Layer Height: 0.4/0.2
How I Designed This
I designed this in SolidWorks based on the original design by Steve5092. The sketch is fully defined and easy to change for various diameter cables.
Category: Organization