Eryone Thinker Filament Runout
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed this as I wanted to reuse the Z Stop Sensor after upgrading my Eryone Thinker with BL Touch and wanted it be…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 442
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remixed this as I wanted to reuse the Z Stop Sensor after upgrading my Eryone Thinker with BL Touch and wanted it be an enclosed unit.
Please post makes, it's nice to see the makes.
Print Settings
Printer:
Eryone Thinker S
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
20%
Filament:
Eryone PETG
Orange Post-Printing =============
Install notes
I gut the tube at 25mm to get the connection between the filament sensor and the extruder. If you print lower than 0.15mm layer, attaching the threaded part will be lose fitting, to fix this I wrapped the end with some paper or plumber tape.
Category: 3D Printer Accessories